We are one of the foremost cartridge filter housing manufacturers in india, the system offers wide range of flow capacities and contaminant holding capacities. Cartridge filter housing diameters can accommodate around 1 to 500 Filter cartridges, It can be made totally of stainless steel and are used in many areas of process filtration.

We only use top quality materials to ensure consistent quality and performance throughout our range of filter housings. No special tools are required to open the filter cartridge housing. Cartridge Filter Housings can be steel or plastic,In common steel housings are more readiliy utilized when the applications require more than one cartridge in the housing,high performance and cost effective industrial filter cartridges for liquid processes. Special duty plastic housings are available which have more than one cartridge for chemical compatibility issues when metallic housings are not suitable.

All housings can be supplied with an ASME code stamp, if required. They are available in sizes for volume flow rates of ~10 up to >800 l/min and also this is usually used as polishing filter in approximately all process industries.

NOTE: Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and gasket/O-ring used. For inquiries on compatibility.

Cartridge Filter Housing

1. Synthetic Housings
2. Stainless Steel Housings
3. Sanitary Stainless Steel Housings

Cartridge Filter Housing Specifications

Carbon Steel:

• 1500 psig (103.4 bar) @ 250°F (121°C)
• 3000 psig (206.9 bar) @ 250°F (121°C)

Stainless Steel:

• 1500 psig (103.4 bar) @ 250°F (121°C)
• 3000 psig (206.9 bar) @ 250°F (121°C)

Cartridge Filter Housing Application

• Filter Housing For Mining
• Filter Housing For Diary
• Filter Housing For Steel & Power
• Filter Housing For water treatment
• Filter Housing For Food & beverages
• Filter Housing For Ceramics
• Filter Housing For Processing Chemicals
• Filter Housing For Cement
• Filter Housing For Coolants
• Filter Housing For Dyes & intermediates
• Filter Housing For Paints & inks
• Filter Housing For Pulp & Paper
• Filter Housing For Automobiles

Standard Features

• Low pressure drop
• High dirt holding capacity
• Housings are permanently piped
• Easy to clean
• In-line inlet and outlet
• Easy to operate & low maintenance
• Stainless steel internals
• Customized design available
• High temperature & high pressure design are available
• Machined cover gasket groove provide positive O-Ring sealing
• Positive sealing arrangement to avoid bypassing
• Low down time

Design Features

• Offered in carbon steel or 304 stainless steel
• Designed for industrial and
• Commercial filtration applications
• Simple nut and bolt design for quick cartridge
• In-line fittings for easy installation
• Quick opening tri clovers design
• Designed for double open end cartridges
• 1" npt pipe size standard
• 1/8" npt drain port on bottom of housing